Polycarbonate Sheets Roofing Roofing Option

Tips for Proper Polycarbonate Roofing Sheets Installation

Written by Courtney Nelson

Without a doubt, polycarbonate sheets can be considered as one of the best roofing materials today. That is why it comes as a surprise to most that the process of installing them is actually simple and easy. It is pretty straightforward as there is no need to cut or drill.

However, readers need to keep in mind that they still have to follow some basic procedures to ensure that everything goes smoothly. This article seeks to help readers with that by providing a couple of useful tips.

Safety Reminders

Before anything else, it is vital that we provide readers with a couple of reminders. Make sure to always keep these in mind in order to avoid any problems which may arise during the course of the installation process.

  • Safety Equipment – Having the proper safety equipment on hand is of paramount importance. For instance, it should go without saying that you will be needing a safety harness and scaffolding since you will be working on the roof. On top of that, you will also be needing a pair of safety eyeglasses as well as gloves to prevent any unwanted injuries which may occur.
  • Follow the Instructions – A lot of people get hurt simply because they failed to follow the instructions indicated on the product’s label. When you are working on home improvement projects such as this one, make sure that you do the procedure exactly as indicated.

Polycarbonate Roofing Sheet Installation

As a basic rule of thumb, the polycarbonate sheets have two sides. Only one of which has the essential UV protection coating that protects your home from the harmful radiations of the sun while also ensuring that the optimal amount of light is able to filter in. Needless to say, you need to ensure that you are installing the sheet the right way up. Luckily, most of these sheets come with a sticker to help you determine which side has the anti-UV coating.

As you proceed with the installation itself, you need to ensure that the purlin tape has been laid over the rafters in order to prevent any expansion noises. We also highly recommend that you purchase pre-cut sheets based on the size of your roof. Believe us when we say that this will save you a lot of time and effort as opposed to having to trim the sheets down yourself.

Now, you will need to secure the sheets with some screws and tighten the fixings in order to prevent any rattling. However, we have to remind readers not to overdo it as excessive tightening can also cause problems such as distortion and stress which may have a detrimental effect on the sheet’s structural integrity.

Once that is done, you can finish the job by putting in some ridge caps and barge caps. These are designed to prevent air and water from penetrating into the building itself.

This article presented readers with a few simple tips on how to properly install polycarbonate roofing sheets. Make sure to always keep these tips in mind if you wish to avoid any trouble down the road.